Error message when you add a user to a local computer Message error adding a user: "Not enough storage is available to complete this operation"

Symptoms

When you use a Microsoft Windows Server domain controller to join a Microsoft Windows based client computer to a domain, you may receive an error message that resembles the following on the client computer:

The following error occurred attempting to join the domain “domain_name.com”: Not enough storage is available to complete this operation.

Additionally, the following Warning message may be logged in the System log on the client computer.

Cause

This problem occurs because the Kerberos token that is generated during authentication is more than the fixed maximum size. In the original release version of Microsoft Windows 2000, the default value of the MaxTokenSize registry entry was 8,000 bytes. In Windows 2000 with Service Pack 2 (SP2) and in later versions of Windows, the default value of the MaxTokenSize registry entry is 12,000 bytes.

For example, if a user is a member of a group either directly or by membership in another group, the security ID (SID) for that group is added to the user’s token. For a SID to be added to the user’s token, the SID information must be communicated by using the Kerberos token. If the required SID information exceeds the size of the token, authentication is unsuccessful.

Resolution

To resolve this problem, increase the Kerberos token size. To do this, follow these steps on the client computer that logs the Kerberos event.

  1. Click Start, click Run, type regedit, and then click OK.
  2. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters

    Note If the Parameters key is not present, create the key. To do this, follow these steps:

    a) Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos

    b) On the Edit menu, point to New, and then click Key.

    c) Type Parameters, and then press ENTER.

  3. On the Edit menu, point to New, and then click DWORD Value.
  4. Type MaxTokenSize, and then press ENTER.
  5. On the Edit menu, click Modify.
  6. In the Base area, click Decimal, type 65535 in the Value data box, and then click OK.
  7. Exit Registry Editor.
  8. Restart the computer.

Related Article: Article ID 935744

How To Fix Scsiport.sys Blue Screen Errors (BSOD) Converting P2V a Windows 2000 error KMODE_EXCEPTION_NOT_HANDLED – scsiport.sys

What Is Scsiport.sys?

Scsiport.sys is a type of SYS file associated with Microsoft Office System Beta 2 Kit 2003 developed by Microsoft for the Windows Operating System. The latest known version of Scsiport.sys is 1.0.0.0, which was produced for Windows. This SYS file carries a popularity rating of 1 stars and a security rating of “UNKNOWN”.

What Are SYS Files?

SYS files such as scsiport.sys are third-party (eg. Microsoft) device drivers or critical system files that come as part of the Windows operating system. Most SYS files allow internal PC hardware or attached hardware, such as a printer, to communicate with third-party software programs (eg. web browsers, word processors, Microsoft Office System Beta 2 Kit 2003) and the operating system (eg. Windows).

Other SYS files are critical system files called “kernel mode device drivers” which are used to power the Windows operating system. Files such as “CONFIG.SYS” contain configuration settings and specify what device drivers should be loaded by the operating system. Without driver files such as scsiport.sys, you wouldn’t be able to do simple tasks such as printing a document.

Why Do I Have SYS Errors?

SYS file errors are typically caused by faulty hardware or corrupt device driver files. Because of the importance of Scsiport.sys in the functionality of Microsoft Office System Beta 2 Kit 2003 and other Windows functions, any corruption or damage to this file can create critical system errors in the form of a “blue screen of death” (BSOD). Please see “Causes of Scsiport.sys Errors” below for more information.

When Do SYS Errors Occur?

SYS errors, such as those associated with scsiport.sys, most often occur during computer startup, program startup, or while trying to use a specific function in your program (eg. printing).

Common Scsiport.sys Error Messages

The majority of scsiport.sys errors that you encounter will be “blue screen of death” errors (also know as a “BSOD” or “STOP error”) that occur in Windows XP, Vista, 7, 8, and 10:

  • “A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: Scsiport.sys.”
  • “:( Your PC ran into a problem and needs to restart. We’re just collecting some info, and then we’ll restart for you. If you would like to know more, you can search online later for this error: scsiport.sys.”
  • “STOP 0x0000000A: IRQL_NOT_LESS_EQUAL – scsiport.sys”
  • “STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLED – scsiport.sys”
  • “STOP 0×00000050: PAGE_FAULT_IN_NONPAGED_AREA – scsiport.sys”

In most cases, you will experience scsiport.sys blue screen errors after you’ve installed new hardware or software. These scsiport.sys blue screens can appear during program installation, while a scsiport.sys-related software program (eg. Microsoft Office System Beta 2 Kit 2003) is running, while a Microsoft driver is being loaded, or during Windows startup or shutdown. Keeping track of when and where your STOP error occurs is a critical piece of information in troubleshooting the problem.

Causes of Scsiport.sys Errors

Scsiport.sys blue screen errors can be caused by a variety of hardware, firmware, driver, or software issues. These could be related to either Microsoft Office System Beta 2 Kit 2003 software or Microsoft hardware, but it is not necessarily the case.

More specifically, these scsiport.sys errors can be caused by:

 

  • Incorrectly configured, old, or corrupted Microsoft Office System Beta 2 Kit 2003 device drivers. (very common)
  • Corruption in Windows registry from a recent scsiport.sys-related software change (install or uninstall).
  • Virus or malware infection that has corrupted the scsiport.sys file or related Microsoft Office System Beta 2 Kit 2003 program files.
  • Hardware conflict after installing new Microsoft hardware, or hardware related to scsiport.sys.
  • Damaged or removed system files after you’ve installed software or drivers related to Microsoft Office System Beta 2 Kit 2003.
  • scsiport.sys blue screen caused by a damaged hard disk.
  • scsiport.sys STOP error due to memory (RAM) corruption.

Requirements:

  • VMware Standalone Converter version 4.0.1 (See Additional Info at the end)
  • Update Rollup 1 for Windows 2000 SP4 from our repository (KB891861)
  • Windows 2000 Sysprep tools (Q257813)
  • A Windows or Linux LiveCD. I recommend Knoppix (6.4+ – Linux) or Hiren (Windows).
    If you need to modify registry keys, use Hiren.

Procedure:

  1. Install VMware Standalone Converter version 4.0.1 on target machine
  2. Converto machine to VMware host or infrastructure;
  3. Extract sysprep tools and place them in C:\Documents and Settings\All Users\Application Data\VMware\VMware vCenter Converter Standalone\sysprep\2k
    That should be on the same machine that has VMware Converter, not the Windows 2000 server.
    * On Windows 2008, the location is C:\Users\All Users\VMware\VMware vCenter Converter Standalone\sysprep\2k (Thanks Anonymous for the tip!)
    or C:\ProgramData\VMware\VMware vCenter Converter Standalone\sysprep\2k (thanks Ben!)
  4. Either apply the update rollup to the server or extract the update rollup and replace it with the file SCSIPORT.SYS in C:\WINNT\system32\drivers. Applying the update is recommended if the system is stable.
  5. Run the Converter and deploy the agent. If you’re asked to restart, restart then start the VMware Converter service manually before running the Converter again, otherwise it’ll ask you to deploy the agent again.
  6. In Step 3: View / Edit Options, Click on the Devices pane and change the disk controller to BusLogic SCSI.
  7. Keep the number of processors as is, because if you change it, Windows 2000 won’t auto-detect new CPUs and you’ll need to update the Hardware Abstraction Layer (HAL) on it manually. See KB234558 and KB249694 for more details.
  8. In the Networks pane, deselect the option to connect at power on.
  9. In the Advanced Options pane, do not select the options to power off the source and select the option to power on the target (VM). Do install VMware tools.
    Do NOT select “configure guest preferences for the virtual machine”

 

How to Find a Lost, Missing, Hidden or Removed Network Card In a scenario where you have physically removed hardware from a machine you can no longer see it in device manager.

In a scenario where you have physically removed hardware from a machine you can no longer see it in device manager.  This does not mean that it is gone.  Evidence of that is, if for example you had a network card that had a Static IP address set and you remove the card and add a new one then try to set the IP address to the same as the old NIC you will get an error message. The error might look something like “The IP address 192.168.30.100 you have entered for this network adapter is already assigned to another adapter (Microsoft Virtual machine Bus Network Adapter #3) which is no longer present in the computer.  If the same address is assigned to both adapters and they both become active, only one of them will use this address.  This may result in incorrect system configuration”.  In Windows Server 2008 R2 and Windows 7 it actually gives you an opportunity to “remove the static IP configuration for the absent adapter”. If you say Yes, this will eliminate the IP conflict problem but does not solve the problem of the adapter still being present in the machine.  In older versions of the OS, it was even worse because every time you go into network properties it gives you an error message.  Another way this comes up is if you move a virtual machine from one host to another.  Like in the case of moving from Virtual Server 2005 R2 to Hyper-V or perhaps you are moving from one Hyper-V machine to another but you did not do an export, you just moved the VHD’s and created a new machine.

The IP address XXX.XXX.XXX.XXX you have entered for this network adapter is already assigned to another
The IP address XXX.XXX.XXX.XXX you have entered for this network adapter is already assigned to another

Getting rid of these old devices is actually very simple. Well, it is simple if you know how

Before you proceed, I recommend that you confirm that you have a good backup. I have never had a problem with this but hey, it is your server not mine.

Description

  • You need to run a command prompt so you can set an environment variable prior to opening the Device Manager This will bring up a command windowClick Start – Type the following command and then press ENTER

    cmd
  • Step 2: We have the command window open.  We now need to set the variable (that is the “set” line and then with the variable set, we need to run Device Manager.
    The file name for the Device Manager snap-in is devmgmt.msc.  The first line will not appear to do anything but it is setting the environment for next step.  The second command will actually open the Device Manager but it will be in a “special” mode which allows you to show devices that no longer exists.Type the following commands pressing ENTER after each line

    set devmgr_show_nonpresent_devices=1

    devmgmt.msc

  • Step 3: Now all we have to do is show hidden devices and you will be able to access the devices that are not present in the machine.  This will also turn a checkbox on in front of the Show Hidden Devices menu option.In this Special Device Manager Window; on the menu, click View then Show Hidden Devices
  • Step 4: Now you can just go find the adapter or device that is missing and delete it!  Expand the network adapter (or whatever category of device) and look for the device that needs to be removed.  The error message that you got should tell you the “name” of the device so you just have to go find that named device.  You may also notice while you are there that the icon for the “non-present” or missing device is slightly subdued so that will make it easier to find it if you have many devices in a category.See screen shot belowExpand the network adapter (or whatever category of device) and look for the device that needs to be removed.
    Right-Click the Device and select Uninstall
devmgr_show_nonpresent_devices
devmgr_show_nonpresent_devices

Related Article: VMware KB  | Microsoft Blog Technet